MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: RS2024

The RPS Studio Background Wall Mount is a heavy duty background holder made of metal and mounts to wall studs or ceiling joists. Arms are 1-5/8 In. wide and vary in length from approximately 5-1/2 In. to 8 In. long to allow background material to easily move up and down. Overall length of the...
Part #: 039

Plugs into Super Clamp socket. Ideal for cross poles when used to support background paper. The Manfrotto 039 U-Hook Cross Bar Holders is a set of two U-hooks that plug into a Super Clamp socket.

* Replaces part # 2902P
Availability: In Stock
$1090
QTY
Part #: 9017

The Wescott Cross Bar with Clips allows the Background Support System (sold separately) to display additional backgrounds. The Cross Bar adjusts from 7 feet to 10.5 feet. When used with the Background Support System, a second background can be supported by positioning directly below the initial...
Availability: In Stock
$8990
QTY
Part #: 046MCG

The Manfrotto Expan Drive Set with Grey Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: In Stock
$8988
QTY
Free Shipping
Part #: 0622

Counterweight for background paper in 2 sections.
Part #: 032B

The Manfrotto 032B Single Autopole (Black) single action locking cam Autopole mounts between the floor and ceiling of a studio.

Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, Hooks, and crossbars. Autopole extends from 210cm to 370cm. The cantilever system...
Part #: 046MCR

The Manfrotto Expan Drive Set with Red Metal Chainenables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: In Stock
$8988
QTY
Free Shipping
Part #: PP173

The Mole Richardson 28 x 44 In. Sheet Showcard (Shiney Silver) is perfect for Manipulating Light. It is used as a hard bounce to remove any Unwanted Reflections.
Availability: In Stock
$699
QTY
Part #: 059WM

Wall mount background paper holder set for one Expan 2920. Comes complete with screw set for mounting to wall studs. Weight 1.2 lbs
Availability: In Stock
$1845
QTY
Part #: 1103

The sturdy, collapsible background stand is made of lightweight aluminum. The unique design allows the stand to hold the background off the floor or adjusts so the tripod legs collapse outward allowing the background to come all the way down to the floor.
  • Fits collapsible backgrounds up to
...
Part #: RS2011

Extends the width of the basic unit 144" to accommodate rolls up to 12' in width. 1 required for each roll.
Availability: In Stock
$4995
QTY
Part #: 0473

The Alu-Core allows you to use the Expan system with uncored paper or cloth backgrounds. It consists of two aluminum sections which interlock by means of a joining casting. The Expans are inserted into the Alu-Core and provide a core for background rolls.

This ALu-Core is 12 ft (3.6 M)long,...
Availability: On Backorder
$6988
QTY
Free Shipping
Part #: 0472

Aluminum core in 2 sections: 50mm diameter for uncored background paper. Designed to accept Expan Drives. Includes double-sided tape to hold paper. Length: 108.3" (9 feet)

* Replaces item # 2922
Part #: 091MCR

The Manfrotto Expan Drive Metal Chain is a replacement red chain. Metal beats plastic for strength and longevity, as far as Expan Drive chains go. It is 11.5' (3.5 m) long. Can replace plastic chain on Expan 046.

Length - 137.79in.  (3.5m)
Weight - 1.32lbs.
Material - technopolymer 
Color
...
Part #: 094

Provides weight to keep Expan chain tight.

* Replaces item # 2925
Part #: RS2014

Extra crossbar for all stands allows additional rolls to be added. Each crossbar extends from 4-1/2 to 10 foot in legnth. 28mm in diameter.
Availability: In Stock
$5595
QTY
Part #: 272B

3 section telescopic background pole on it's own.
Availability: In Stock
$7088
QTY
Free Shipping
Part #: 046MCB

The Manfrotto Expan Drive Set with Black Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the...
Availability: In Stock
$8988
QTY
Free Shipping
Part #: YBPDBLACK

The Phototools Background Paper Drive Set with Black Metal Chain enables the raising and lowering of background paper without lowering the support stands. The paper drive set uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts
...
Availability: In Stock
$4999
QTY
Free Shipping
Part #: PP107

The Mole Richardson 32 x 40 In. Sheet Showcard (Black/White) is perfect for Manipulating Light. White will Bounce the Light, Black will help remove any Unwanted Reflections.
Availability: In Stock
$399
QTY
Part #: PP131

The Mole Richardson 28 x 44 In. Sheet Showcard (Smooth Silver Matte) is perfect for Manipulating Light. A reflection medium helps to remove any Unwanted Reflections.
Availability: In Stock
$699
QTY
Part #: PP200

The Mole Richardson 32 x 40 In. Sheet Showcard (Shiney Pebbled Silver) is perfect for Manipulating Light. A reflection medium helps to remove any Unwanted Reflections.
Availability: On Backorder
$699
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]