MAIL ORDER 800-321-4726
Audio Cables
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: QAD2

The Mini QAD2 1/8" for XLR Male Adapter is used to convert 1/8" mini connections to XLR. This is the same adapter that is shipped with the Sniper and Production Kits.
Availability: On Backorder
$2499
QTY
Part #: 10147RT1

The Calrad Male XLR to Right Angle 3.5mm Stereo Plug is useful male XLR to 3.5mm stereo plug. The plug is safe and durable with black PVC jacketed cable. The cable is shielded to avoid any interference.
Availability: On Backorder
$899
QTY
Part #: 35518RT

The Calrad 3.5mm Stereo Jack to 2.5mm Stereo Plug Metal is useful Nickle 3.5 mm stereo jack to 2.5 mm stereo plug adapter. The adopter facilitates to convert 3.5mm stereo plug to 2.5mm stereo, to match your audio needs.

Availability: On Backorder
$1140
QTY
Part #: FPSC1018C

PSC cables are hand built, using Canare cable and Neutrik connectors. 3 pin male to 3 pin female cable
Availability: On Backorder
$2750
QTY
Part #: 35610RT

The Calrad 2.5mm Stereo Plug Adapter to XLR Male lets you use a microphone with any 2.5mm jack. You will still need a XLR female cord to use the microphone with this adapter.
Availability: On Backorder
$1650
QTY
Part #: MMCCFG

The MyMyk Connector Cable allows an external microphone such as the SmartMyk directional microphone, a lapel or tie- clip microphone to be plugged into the smartphone or tablet device for better quality audio that complements the motion picture captured. The electronics in the cable disables the...
Availability: On Backorder
$1999
QTY
Part #: 45822

Polarized AC power cord with round/round end with two slots for use with many portable audio and video equipment.
Availability: On Backorder
$302
QTY
Part #: 500-135

Because keeping your cables organized is critical, INOVATIV has created these multipurpose 3" Cable Hooks to work directly with the INOVATIV Accessory Cross Bar.

Features:
  • Keeps Cables Organized
  • Made from T6 Aircraft Aluminum
  • Length: 3.0" (76.2 mm)
Availability: On Backorder
$7995
QTY
Free Shipping
Part #: 10-95-1.5

The Calrad Microphone Cable Male to Female XLR is a professional microphone extension cable with Male to Female XLR connectors with very low signal loss. The cable is safe and durable with black PVC jacketed closing and is 1.5 feet long.
Availability: On Backorder
$1099
QTY
Part #: 55941B

The Calrad Audio Cable With 3.5mm Mono Plug Each End 6 Ft. is an extension cable that allows you to connect an iPod or other media player to pro-quality rack or house audio gear. The Audio Cable is made of high quality material.
Availability: On Backorder
$285
QTY
Part #: DXA2T

This adapter is designed to easily attach professional microphones and other audio gear to any camcorder that has a built-in microphone jack. The DX-A2T gives you all the benefits of using balanced audio devices for noise-free operation as well as control over the signal levels to ensure the...
Part #: POWERTAP20XLR

A 20 inch long cable for connecting a camera mounted Ultralight 4 pin XLR to the PowerTap receptacle on the Gold Mount of any size camera or one-piece camcorder.
Part #: MCC2

The BeachTek 2-Channel Audio Adapter and Bracket is a two-channel, audio adapter / bracket combo that lets you mount, connect and control two audio devices for camcorders or DSLR cameras. This adapter is designed to easily attach wireless mics and small, self powered, camera mounted microphones...
Part #: DSLRMICMON

The Sescom DSLR-MIC-MON 3.5mm Mic to Mic with Audio Monitor Tap is a Y cable specifically designed for use with DSLR cameras. The cable features 1/8" (3.5mm) TRS mini-male connections on each end, along with a single 1/8" (3.5mm) TRS mini-female connection for headphone monitoring. The DSLR-MIC-MON...
Part #: IPHONE-MIC-1RA

The Sescom 3.5mm Right Angle TRRS to XLR Mic & 3.5mm Monitoring Jack Cable allows you to connect a pro XLR mic to your iPhone, iPod or Blackberry and take advantage of the many apps designed for audio recording on a Smartphone. Using external microphones will improve the quality of your recordings....
Part #: ZH2NAP

Zoom APH2n Accessory Pack for H2n Portable Recorder offers a variety of accessories that allow for easier recording in a number of circumstances. Use the stand with the wired remote for hands free operation, a windscreen for when you're out doing some field recording, and a USB-type AC adapter...
Part #: A181

The Sennheiser A181 is a replacement antenna for the Evolution series wireless body-pack transmitters and receivers. This antenna is compatible with components assigned to frequency group "A".
Part #: LN2MICTASDR100

The Sescom LN2MIC-TASDR100 cable features a -35dB L Pad attenuator on audio channels to reduce Professional Line Level output (+4dBu) to the camera mic input sweet spot level. The cable is designed with the proper impedances to assure maximum voltage transfer and low noise operation. The cable...
Part #: LN2MICZMH4GH1

Sescom's specialty cable solves interface problems with Panasonic DSLR cameras when integrating a Zoom H4 or similar audio recorder. The Panasonic Lumix GH2 and Lumix GH1 DSLR cameras utilize an unbalanced stereo mic level audio input on a mini TRS 2.5mm jack. Manufacturers do this to save valuable...
Part #: K6P

The K6P powering module is at the heart of Sennheiser's professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12 - 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined...
Part #: LN2MICZMH4MON

Designed for portable digital audio recorders and mic preamps with a single output jack. This jack is typically used for headphone monitoring or connecting to a DSLR audio input for recording. The LN2MIC-ZMH4-MON Y-Splitter cable allows you to do both monitoring and recording from a single output...
Part #: SPSC1022

PSC cables are hand built, using Canare cable and Neutrik connectors. 3 pin male to 3 pin female cable.
Availability: In Stock
$10300
QTY
Free Shipping
Part #: VXLR

Female Mini Jack to Male XLR for connecting the Rode VideoMic directly to cameras with XLR inputs.
Availability: In Stock
$999
QTY
Part #: VC1

The Rode Microphones 10 ft. Stereo Mini Male to Stereo Mini Female VideoMic Cable is a 3m stereo audio extension cable, featuring two core shielding and a gold plated jack and socket. It is ideal for use to connect a RODE VideoMic, Stereo VideoMic or VideoMic Pro when the microphone is mounted...
Availability: In Stock
$1099
QTY
Part #: AT831450

2-conductor, shielded, vinyl-jacketed, broadcast-type cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end.

Features
  • 50'
  • Professional connectors
  • XLRF to XLRM balanced
  • Ultra-flexible cable
  • High conductivity
Availability: In Stock
$1999
QTY
Part #: SMIS0030D

Plastic cube used to showcase a production name on a microphone. The foam insert ensures a good fit around the microphone.
Availability: In Stock
$2995
QTY
Part #: 10-95-6

The Calrad Microphone Cable Male to Female XLR is a professional microphone extension cable with Male to Female XLR connectors with very low signal loss. The cable is safe and durable with black PVC jacketed closing and is 6 feet long.
Availability: In Stock
$1299
QTY
Part #: SPSC1018B

PSC cables are hand built, using Canare cable and Neutrik connectors. 3 pin male to 3 pin female cable.
Availability: In Stock
$2565
QTY
Part #: FPSC1094

Connects an XLR terminated microphone to the input on consumer video cameras. 18". Very durable, Handmade in the USA.
Availability: In Stock
$3495
QTY
Part #: FPSC1019A

PSC cables are hand built, using Canare cable and Neutrik connectors. 3 pin female to 3 pin female cable.
Availability: In Stock
$4000
QTY
Part #: FPSC0001

Can power any 48PH microphone with ease and efficiency. The PSC 48 PHantom Microphone Supply operates from a single 9V alkaline battery for 10 to 30 hours. The unit is housed in a rugged, black anodized, aluminum case. A sturdy, removable belt clip is included.
Availability: In Stock
$11995
QTY
Free Shipping
Part #: HX-MI

The Azden® i-Coustics? HX-Mi TRRS Mic/Headphone Cable is designed to make your Azden microphone compatible with your mobile devices. Just plug your Azden microphone into the HX-Mi mic input and attach the cable to the microphone/headphone jack of your device. Plug your headphones into the headphone...
Availability: In Stock
$2000
QTY
Part #: 10145RT1

The Calrad Female XLR to 3.5mm Stereo Plug is useful female XLR to 3.5mm stereo plug. The plug is safe and durable with black PVC jacketed cable. The cable is shielded to avoid any interference.
Availability: In Stock
$999
QTY
Part #: AT831410

Audio-Technica Premium Microphone Cables are engineered for maximum signal transfer and minimum loss.The AT831410 3-pin XLR Male to 3-pin XLR Female Balanced Cables are esigned for low-impedance operation, these balanced cables feature heavy-duty construction and professional Neutrik® connectors. To...
Availability: In Stock
$1695
QTY
Part #: SPSC1018A

PSC cables are hand built, using Canare cable and Neutrik connectors.
Availability: In Stock
$2875
QTY
Part #: LN2MIC-ZOOMH4N

With the age of professional pocket recorders that can produce very high quality sound, such as the the Sony PCMD50 or a Samson Zoom H4N, came devices that output different line level audio signals. The Sescom Line to Microphone Attenuation Cable for HDSLR Cameras features exclusive circuitry...
Availability: In Stock
$2695
QTY
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]