Video Tripod Kits

MagnumXG13 Grounder Tripod With FX13 Head

Samy's Camera — Mon, 03 Dec 2012 08:00:00 GMT

The MagnumXG13 Grounder Tripod With FX13 Head is a very useful and a good quality Tripod by its manufacturer Davis & Sanford. It is a tripod designed for use indoors and out, shooting still photos or video. It features separate pan and tilt locks, an adjustable pan and tilt handle, four bubble levels, two quick release plates (one for stills, one for video), and a four-position independent leg adjustment for working on uneven ground.

Features:

Sturdy body and legs for indoor or outdoor use with grounder feature for digital DSLR, still, video or scope uses
FX13 fluid 3-way pan and tilt head
On-off head counterbalance control
Maximum height of 6'
Minimum height of 8"
Four-position independent leg adjustments
Quick-lift two-section center post for rapid adjustment and low range shooting
Maximum load capacity of 8 lb (3.6 kg)
Bottom center post hook allows for hanging equipment or adding weight to increase stability
Carrying case included

$179.95

AD71FK5 Video Tripod Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Benro Video Tripod Kits are ideal for the latest generation of compact digital video cameras, HDSLR's and still cameras with long lenses that can benefit from the smooth movement and dampening characteristics of what have traditionally been video-exclusive tripod and head designs. The AD71K5F represents an incredible value combining a sturdy lightweight Tripod and a precision matched Ballhead.

$195.00

S-Series 1 Video Head & AL Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

The Benro S-Series 1 Video Head & AL Flip Lock Legs Tripod are based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. Offering exceptional rigidity and torque-resistance, so critical to smooth camera movement, using Aluminum Alloy legs in combination with strategically select cast and machined aluminum and magnesium alloy components.

For an extra measure of flexibility, this Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level. It comes equipped with a choice of screw-in rubber feet or stainless steel spiked feet.

A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly. A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod's center of gravity for increased stability.

Tilt Drag/Lock Lever - S2: Set tension control and lock of full front to rear tilt axis
QR Plate System with Safety Lock - S2: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S2: With angular adjustment for convenient user control
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S2: Adjusts tension and locks Head on 360 degree pan movement
Built-in Bubble Level - S2: Allows adjustment to prevent uneven pans
QR4 Quick Release Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head

$200.00

S-Series 2 Video Head & AL Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

The Benro S-Series 2 Video Head & AL Flip Lock Legs Tripod are based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. Offering exceptional rigidity and torque-resistance, so critical to smooth camera movement, using Aluminum Alloy legs in combination with strategically select cast and machined aluminum and magnesium alloy components.

For an extra measure of flexibility, this Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level. It comes equipped with a choice of screw-in rubber feet or stainless steel spiked feet.

A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly. A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod's center of gravity for increased stability.

Tilt Drag/Lock Lever - S4: Set tension control and lock of full front to rear tilt axis
QR Plate System with Safety Lock - S4: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S4: With angular adjustment, fits on both left and right of head for convenient user control
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S4: Adjusts tension and locks Head on 360 degree pan movement
Built-in Bubble Level - S4: Allows adjustment to prevent uneven pans
QR4 Quick Release Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head

$275.00

S-Series 2 Video Head & AL Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

Tilt Drag Knob with Lock Lever - S6: Variable control Drag with separate Lock Lever
QR Plate System with Safety Lock - S6: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S6: With angular adjustment, fits on both left and right of head for convenient user control
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S6: Adjusts tension and locks Head on 360 degree pan movement
Posi-Step Counterbalance - S6: Adjustable counterbalance settings in 2, 4.5 and 6 Kg steps
Built-in Bubble Level - S6: Illuminated/Allows adjustment to prevent uneven pans (uses CR1220 Battery)
501PL Compatible QR6 Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head

$300.00

S-Series 1 Video Head & CF Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

The Benro S-Series 1 Video Head & CF Flip Lock Legs Tripod are based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. Offering exceptional rigidity and torque-resistance, so critical to smooth camera movement, using Carbon Fiber legs in combination with strategically select cast and machined aluminum and magnesium alloy components.

For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level. It comes equipped with a choice of screw-in rubber feet or stainless steel spiked feet. A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly.

Center-Column Hook: A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod's center of gravity for increased stability
Tilt Drag/Lock Lever - S2: Set tension control and lock of full front to rear tilt axis
QR Plate System with Safety Lock - S2: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S2: With angular adjustment for convenient user control
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S2: Adjusts tension and locks Head on 360 degree pan movement
Built-in Bubble Level - S2: Allows adjustment to prevent uneven pans
QR4 Quick Release Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head

$318.00

S-Series 2 Video Head & CF Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

The Benro S-Series 2 Video Head & CF Flip Lock Legs Tripod are based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. Offering exceptional rigidity and torque-resistance, so critical to smooth camera movement, using Carbon Fiber legs in combination with strategically select cast and machined aluminum and magnesium alloy components.

For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level.

It comes equipped with a choice of screw-in rubber feet or stainless steel spiked feet. A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly.

Center-Column Hook: A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod's center of gravity for increased stability
Tilt Drag/Lock Lever - S4: Set tension control and lock of full front to rear tilt axis
QR Plate System with Safety Lock - S4: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S4: With angular adjustment for convenient user control
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S4: Adjusts tension and locks Head on 360 degree pan movement
Built-in Bubble Level - S4: Allows adjustment to prevent uneven pans
QR4 Quick Release Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head

$440.00

S-Series 2 Video Head & CF Flip Lock Legs Tripod

Samy's Camera — Mon, 17 Dec 2012 08:00:00 GMT

Center-Column Hook: A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod's center of gravity for increased stability
Tilt Drag Knob with Lock Lever - S6: Variable control Drag with separate Lock Lever
Built-in Bubble Level - S6: Illuminated/Allows adjustment to prevent uneven pans (uses CR1220 Battery)
501PL Compatible QR6 Plate: Removable Quick Release plate with sliding adjustment for better camera balance
Heavy Duty Case and Strap: For handy transport and protection of the tripod and head
Quick Lock Legs with Anti-Rotation Leg System: Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up
Closed-Cell Foam Grip: A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod
Integral Leveling Platform: Provides fine leveling control on the vertical Center Column
Pan Drag/Lock Lever - S6: Adjusts tension and locks Head on 360 degree pan movement
Posi-Step Counterbalance - S6: Adjustable counterbalance settings in 2, 4.5 and 6 Kg steps
QR Plate System with Safety Lock - S6: Easy camera mounting and dismount for transport
Interchangeable Pan Bar Handle - S6: With angular adjustment, fits on both left and right of head for convenient user control

$465.00

Z113 Laser Tripod System

Samy's Camera — Thu, 12 Jan 2012 08:00:00 GMT

The Z113 Laser Tripod System is avery good quality Tripod from Cartoni. It is the ideal solution for supporting DV camera payloads up to 22 lbs (10kg) when portability is paramount. Combined with the L504 ultra light 2-stage tripod and a mid-level spreader for quick and easy setup and break down, the FZ113 is a sleek performer for all your mobile DV needs.

Features:

Continuously Adjustable Counterbalance System - The Laser features an infinitely variable counterbalance with easily readable numeric reference providing excellent performances at any tilt angle from -90 to +90 degrees.
Pan and Tilt Control - The Laser offers a patented fluid damping system ensuring consistent drag levels and smooth camera movements throughout the range and allows continuous adjustments in both pan and tilt modes.
Tripod - The ENG tripod incorporates the ultra fast and secure flip-clamping system. Each leg assures excellent torsional rigidity and no play thanks to the reliable self-adjusting pivot to the 100mm diameter-leveling base.
Feet - The bottom foot includes a threaded spike receiving an adjustable rubber foot (not included) and interfaces with dollies and ground spreaders

$4,799.00

Provista 7518 Tripod with FM18 Head & W3 Dolly

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Combined with the FM18 Fluid Video Head, the Davis & Sanford ProVista 7518 Tripod provides rigid support for those who need strength more than versatility in height options. It assembles to its working height very quickly thanks to a 75mm claw ball and self-aligning quick-flip leg locks.

$219.00

ProElite 75mm 2-in-1 Video Tripod With Fluid Head

Samy's Camera — Fri, 26 Apr 2013 07:00:00 GMT

The Davis & Sanford ProElite 75mm 2-in-1 Video Tripod With Fluid Head is a versatile and heavy-duty tripod that features a 2-stage aluminum tripod plus a 5-15 fluid head and 5-step counterbalance system.

To ensure its stability, an adjustable ground spreader with snap-in center support brace is included. The tripod with the fluid head can extend up to the height of 64 In. and can hold a maximum load of 15 lb. This kit is ideal for DV, HDV, and DSLR shooting configurations.

Features:

Ideal tripod and head kit for DV,HDV, and DSLR camera configurations
2-in-1 spreader feature includes snap-in center support brace with boots for uneven ground plus adjustable ground spreader for maximum rigidity
All aluminum tripod legs, canopy and head structure
2-stage quick-lock leg clamping system
Rapid action transport clips
Spike feet or rubber feet option included
5-15 head has selectable 4-position pan and tilt drag
5-15 head has selectable 5-position plus 0 counterbalance system
5-15 head has 80mm sliding camera plate range and bubble level
Heavy-duty ballistic nylon padded tripod bag included

$539.99

ST-600 Lightweight Video Tripod with Pan Head

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Dolica ST-600 lightweight tripod has all the features of Dolicas light weight ST-Series but includes a highly upgraded and capable video pan head. The upgraded video pan head is what makes the ST-600 series superior in shooting video because it contains a fluid counter-weight spring for both the pan and tilt.The panhead utilizes upgraded plastics so it's much stronger and smoother that most standard pan heads. The Dolica ST-600/650 series can be used in shooting pictures as well since its capable of vertical shots and smooth fluid controls for movement. This is a great upgrade to the entry level tripod for the video camera user in light duty applications.

$34.99

MT-700 65" Video Tripod with Hydraulic Fluid Head

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Dolica MT-700 professional video tripod designed for amateurs and pro's that need a heavy-duty and elegant video tripod for serious shooting. Built to handle up to 17.6lbs, its suitable for professional camcorders as wells as DSLR's with HD videofunction. The MT-700 is made from upgraded thicker aluminum legs. This helps support the ultra-smooth video panhead. TheMT-700 pan head includes a quick release plate with both 1/4" and 3/8" screws. The fluid tilt motion is accomplished through acounter weight spring and the pan motion is fluid damped. This style of fluid damping makes the MT-700 panhead very durableand resilient. An adjustable handle is included for mounting on left or right side of the head. Included with the MT-700 is a paddednylon case for storage and handling.

$139.99

595B Fig Rig Camera Stabilizing System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Manfrotto Fig Rig camera-stabilizing system was the brainchild of film director Mike Figgis, who employed the idea on many of his award-winning films. Non-traditional in design, simple and effective, the Fig Rig is the only modular system in the world to smoothly support the DV camera while acting as a frame to mount the necessary accessories including zoom controllers, mics, mixers, lights, monitors, arms and more.

Essentially a circular frame with crossbar mount for most mini DV cameras, the Fig Rig becomes another body part to produce smooth, steady traveling shots. As the operator walks, their muscles and tendons absorb all the shocks, transferring only fluid movements to the camera. With no straps or harnesses attached to the Fig Rig, quick and wide movements can be made within the same shot from ground-level to overhead, all in one smooth movement. The camera, accessories and operator become one, allowing for quick and unobtrusive filming, allowing for flexibility and expanded creativity.

In addition to being a steady support, the Fig Rig is a frame on which to build your video system. Your camera has only one hot-shoe for accessories, limiting you to one light or one monitor. With the Fig Rig, you can mount a number of vital accessories for today's cameras. With the use of the optional 595CLA clamp, you can convert the Fig Rig frame into a fully-loaded roving cine rig precisely positioning your mic or monitor anywhere around your camera. Add on a Manfrotto 521 series remote control and now you have complete fingertip control of zoom and focus. Customize the Fig Rig to your liking.

Features:

Hand Pads - For a comfortable and secure grip even in the most extreme environments.
Cable Clip - Supplied with 4 cable clips to keep all your wires wrapped cleanly around the rig and out of your shot.
Crossbar - The camera bar is threaded with one 1/4"-20, 3/8" and 5/8" hole for additional accessory mounting.
Rubber Base Padding - A non-slip rubber pad provides stability when using the Fig Rig on a flat surface such as a table, floor or railing.
Sliding Quick Release Plate - Supplied with a 3433PL sliding QR plate allowing you to position and balance your camera. The plate system can be switched out with a variety of Manfrotto plate assemblies to best match your camera.
Compatible video remote controls - With Manfrotto's 521 series remote controls you can control zoom and focus (for Sony and Canon). With the Fig Rig you have complete control of your camera without ever removing your hands from the Rig.

$314.99