Equipment Cases & Bags

3i Series Mil-Standard Waterproof Case 5 (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

SKB 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

$94.99

Padded Tripod Case Medium 4.5x28"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Heavily-padded high-quality tripod carrying case. Fits Giottos as well as Gitzo and Manfrotto tripods.

$25.95

Padded Tripod Case Large 5x33'

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Heavily-padded high-quality tripod carrying case. Fits Giottos as well as Gitzo and Manfrotto tripods.

$34.95

9900 Soft Bag for Beauty Dish

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Lightweight nylon bag designed to carry a Hensel 22" white or silver beauty dish reflector. There is an internal pocket that can carry a 7.0" grid and grid holder.

$52.00

Case for Softube 400

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

A lightweight telescoping tarvel case for the Softube.

$133.00

4ft 6-Lamp Carry Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 4ft 6-Lamp Carry Case holds 6 4ft Lamps and the case has a foam padded interior that has a corrugated plastic shell.

$55.00

iM2975 Storm Trak Case with Foam (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican iM2975 Storm Trak Case with Foam (Black) is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by three double-layered, soft-grip, solid-core handles, lightweight retractable, telescoping handle and rugged in-line wheels.

Features:

Five Press & Pull Latches
Three Double-layered, Soft-grip Handles
Two Padlockable Hasps
In-line Wheels
Telescoping Handle
Vortex® Valve
Flush Powerful Hinges
Lightweight Strong HPX® Resin
Watertight
Guaranteed For Life

$239.95

1010 Micro Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1010 micro cases has the legendary strength as the normal sizes pelican cases. This mini case is great for protecting small electronic devices and other valuables. It's interior space measures 4.3 x 2.8 x 1.6 in. leaving space for a cell phone, camera, MP3 player or other small electronic device.

$9.49

1010 Micro Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1010 Micro Case (Clear Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1020 Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

A water-resistant, crushproof, and dust-proof case made to carry small valuable items. It is made of copolymer, which makes it extremely strong and durable. It has a rubber liner for extra protection, which doubles as an o-ring seal. The case has an Automatic Pressure Equalization Valve that balances interior pressure and keeps water out. Includes lanyard to carry the case.

$11.95

1020 Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1020 Micro Hard Case (Clear Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1050 Watertight Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Micro Case Series you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. Every Micro case is available in solid color or clear with matching liner and speed lock. They include a ring and a lanyard for easy attachment.

$14.39

1050 Watertight Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1060 Watertight Micro Hard Case (Clear Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

An unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case. It is made of copolymer and has a matching liner. The case has a speed lock, clear purge cap. The case can be attached to a belt or strap using he included carabiner. Also has a Temperature rating of -10 to +199.4 degreeF (-23 to +93 degreeC)

$17.39

1060 Watertight Micro Hard Case (Clear Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1060 Watertight Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

PC1120FBL Watertight Hard Case with Foam Insert (Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Pelican Case is unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. The cases are made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has an exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.

$24.95

1120 Watertight Hard Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Pelican Protector Cases are made with Copolymer Polypropylene, using an open cell core and solid wall construction, which is stronger and lighter that the competion. You can tell its a Pelican case by the distinctive "twin-ribbed" top surface. Stainless steel pins are used for hinges and handles. The new Double-Throw latches are much easier to open.

$24.95

1120 Case with Foam (Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1120 Case with Foam (Yellow) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$24.95

1150 Case with Foam (Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1150 Case with Foam (Yellow) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$26.95

1150 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1150 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$26.95

1170 Protector Case with Foam for Handheld Electronics (Black)

Samy's Camera — Tue, 09 Oct 2012 07:00:00 GMT

The 1170 Protector Case with Foam for Handheld Electronics (Black) is a very good quality and a useful Protector Case by its manufacturer Pelican. It has easy open double throw latches, an automatic pressure equalization valve, an o-ring seal and stainless steel hardware. The case is carried by an oversized folding handle.

Features:

The pistol, handgun and hand-held electronics protection solution
Watertight, crushproof, and dust proof
Easy open Double Throw latches
Open cell core with solid wall design - strong, light weight
O-ring seal
Automatic Pressure Equalization Valve
Stainless steel hardware
Pick N Pluck with convoluted lid foam
Lifetime Guarantee of Excellence

$36.95

1200 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1200 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by an oversized handle that enables a person to use two hands for heavy loads.

$38.95

1400 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1400 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding molded handle.

$74.95

1400 Case with Foam (Orange)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The 1400 Case with Foam is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding molded handle.

$74.95

1450 Medium Watertight Hard Case with Pick-N-Pluck Foam (Orange)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1450 Case is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber over-molded handle. The Pelican 1450 offers an interior storage area of 14.60" x 10.18" x 6.00"

$81.95

1430 Toploader Watertight Hard Case with Foam Insert (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1430 Case is unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. It is made of Ultra High impact structural copolymer that makes it extremely strong and durable. It's exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the care for total subjection and protection against impact, vibration or shock.

$84.95

1450 Medium Watertight Hard Case with Padded Dividers (Silver)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1450 camera case offers an interior storage area of 14.62" x 10.18" x 6.00". This case comes complete with an 8 piece padded divider set that allows you to configure and organize small and large items within the case. This divider set is made from ballistic nylon and are padded and flexible. Velcro fastener on the edges that are used to attach the dividers to the tray or other dividers.

$119.95

1450 Medium Watertight Hard Case with Padded Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1550 Case with Foam (Orange)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1550 Case with Foam (Orange) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has comfortable rubber over-molded handle. Includes a four-piece foam set that consists of one "egg crate" foam upper section, two Pick 'N' Pluck foam sections, and one 1" blank bottom foam section.

The 1550 case has the following certificates: IP67 (Ingress Protection) = 1 meter submersion or 30 minutes, MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280 and ATA 300 specifications for transit cases.

Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer polypropylene and an open-cell core with solid wall design, which makes the case strong and lightweight
Includes a four-piece foam set that consists of one "egg crate" foam upper section, two Pick 'N Pluck foam sections, and one 1" blank bottom foam section
Easy-open double throw latches with padlock protectors
0.25" (6.4 mm) neoprene o-ring seal is included.
Comfortable rubber over-molded handle
Automatic pressure equalization valve for changes in altitude or temperature

1550 Case Certificates

IP67 (Ingress Protection) = 1 meter submersion or 30 minutes
MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280
ATA 300 specifications for transit cases
Temperature rating -10 to +210° F (-23 to +99° C)

$122.94

1500 Case Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This 1500 Case Dividers (Black) includes a multi-layer lid organizer with a clear cover and numerous clear pockets, made to find everything right away. The lid organizer cover has touch fastener closures, to keep supplies in place during transport, and the case includes padded dividers with adjustable walls for customizing compartments to any size.

FEATURES:

Watertight, crushproof, and dust proof
Easy open Double Throw latches
Open cell core with solid wall design - strong, light weight
O-ring seal
Automatic Pressure Equalization Valve
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors
Pick N Pluck with convoluted lid foam

$125.69

1504 Waterproof 1500 Case with Padded Black Dividers (Orange)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1504 Waterproof 1500 Case with Padded Black Dividers (Orange) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding rubber over-molded handle.

This case includes a 14 piece padded black divider set consisting of one tray, two long, two medium and nine short padded and flexible dividers.

Construction

Ultra-High Impact structural copolymer
Watertight, crushproof, and dust proof
Padded black divider interior
Open cell core with solid wall design
Stainless steel hardwareIncludes a 14-piece padded black divider set consisting of one tray, two long, two medium and nine short padded and flexible dividers
Automatic pressure equalization valve
0.25" (6.4mm) neoprene o-ring
Easy-open double throw latches
Temperature rating -40 to +210°F (-40 to +95°C)
Rubber over-molded handle

Certifications

IP67 (1 meter submersion for 30 minutes)
Def Stan 81-41/STANAG 4280

$125.69

1504 Waterproof 1500 Case with Padded Black Dividers (Silver)

Samy's Camera — Thu, 01 Dec 2011 08:00:00 GMT

The Pelican 1504 Waterproof 1500 Case with Padded Black Dividers (Silver) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding rubber over-molded handle.

This case includes a 14 piece padded black divider set consisting of one tray, two long, two medium and nine short padded and flexible dividers.

Construction

Ultra-High Impact structural copolymer
Watertight, crushproof, and dust proof
Padded black divider interior
Open cell core with solid wall design
Stainless steel hardwareIncludes a 14-piece padded black divider set consisting of one tray, two long, two medium and nine short padded and flexible dividers
Automatic pressure equalization valve
0.25" (6.4mm) neoprene o-ring
Easy-open double throw latches
Temperature rating -40 to +210°F (-40 to +95°C)
Rubber over-molded handle

Certifications

IP67 (1 meter submersion for 30 minutes)
Def Stan 81-41/STANAG 4280

$125.69

1520 Case with Padded Dividers (Silver)

Samy's Camera — Thu, 01 Dec 2011 08:00:00 GMT

The Pelican 1520 Case with Padded Dividers (Silver) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer, which makes it extremely strong and durable. It includes a 0.25" (6.4mm) neoprene o-ring, ABS latches that seal perfectly and an automatic purge valve for quick equalization after changes in atmospheric pressure.

The 1524 case meets ATA standards for transit cases, is NATO-codified, and is tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).

This case includes a fifteen piece padded and flexible divider set.

Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 15 piece padded divider set consisting of one tray, four long, 10 short padded and flexible dividers
Built-in automatic pressure equalization valve for changes in altitude or temperature
Temperature rating -10 to +210° F (-23 to +99° C)
Easy open Double Throw latches
Stainless steel hardware
Padlock protectors provide added strength and extra security against cutting and theft
Comfortable rubber over-molded handle

1520 Case Certificates

IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
MIL C-4150J (Military Standard)
Def Stan 81-41/STANAG 4280

$144.95

1600 Watertight Hard Case with Foam Insert - Silver (Grey)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1600 Watertight Hard Case with Foam insert - Silver (Grey) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection and organization. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

Features:

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable.
Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
Watertight, crushproof, and dust proof
Floats in salt water with 55 lbs (25 kg) load
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve
O-ring seal
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors

$144.99

1600 Watertight Hard Case with Foam insert - Yellow

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1600 Watertight Hard Case with Foam insert - Yellow is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection and organization. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

Features:

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable.
Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
Watertight, crushproof, and dust proof
Floats in salt water with 55 lbs (25 kg) load
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve
O-ring seal
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors

$144.99

1600 Case with Foam (Orange)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1600 Case with Foam (Orange) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

This case has 4-piece foam set interior.

Construction

Ultra-high Impact structural copolymer
Open-cell core with solid wall design
Four-piece foam set interior
Easy open double throw latches
Built-in automatic pressure equalization valve
Padlock protectors
Stainless steel hardware
Includes a four piece foam set that consists of o1 "egg crate" foam upper section, 2 Pick 'N Pluck foam sections and one 1.0" blank bottom foam section
Temperature rating -10 to +210° F (-23 to +99° C)
Comfortable rubber over-molded handle

1600 Case Certificates

IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
Def Stan 81-41/STANAG 4280

$144.99

1550 Case with Foam (Silver)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1550 Case with Foam (Silver) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has comfortable rubber over-molded handle. Includes a four-piece foam set that consists of one "egg crate" foam upper section, two Pick 'N' Pluck foam sections, and one 1" blank bottom foam section.

The 1550 case has the following certificates: IP67 (Ingress Protection) = 1 meter submersion or 30 minutes, MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280 and ATA 300 specifications for transit cases.

Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer polypropylene and an open-cell core with solid wall design, which makes the case strong and lightweight
Includes a four-piece foam set that consists of one "egg crate" foam upper section, two Pick 'N Pluck foam sections, and one 1" blank bottom foam section
Easy-open double throw latches with padlock protectors
0.25" (6.4 mm) neoprene o-ring seal is included.
Comfortable rubber over-molded handle
Automatic pressure equalization valve for changes in altitude or temperature

1550 Case Certificates

IP67 (Ingress Protection) = 1 meter submersion or 30 minutes
MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280
ATA 300 specifications for transit cases
Temperature rating -10 to +210° F (-23 to +99° C)

$159.95

1600 Watertight Hard Case with Dividers - Silver (Gray)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1600 Watertight Hard Case with Dividers - Silver (Gray) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection and organization. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

Features:

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable.
Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
Watertight, crushproof, and dust proof
Floats in salt water with 55 lbs (25 kg) load
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve
O-ring seal
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors

$196.95

1640 Transport Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1640 Transport Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.

$253.12

1730 Transport Case with Foam (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Pelican 1730 Transport Case with Foam (Black) is a watertight, crushproof and dust proof polypropylene case. It has six easy open ABS double throw latches with stainless steel padlock protectors. It has an o-ring and an automatic pressure release valve with a temperature rating -10 to +210°. There are double grip fold down handles on each side, and polyurethane wheels with stainless steel bearings.

This case has a five-piece foam set included.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Five-piece foam set consisting of one 2.0" convoluted top foam, three 3.0" center foam and one 1.0" bottom foam
Built-in automatic pressure equalization valve for changes in altitude or temperature
Temperature rating -10 to +210°F (-23 to +99°C)

Carrying Options

Double grip fold down handles on the sides
Strong polyurethane wheels with stainless steel bearings
Padlock protectors provide added strength and extra security against cutting and theft

$334.99

Transpac Single Kit Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Transpac Single Kit Case is the perfect choice for transporting small location lighting kits. The case has a rugged exterior combined with a protective interior-offering durability and safety in one piece. This case is customizable for a variety of configurations. The Transpac Single Kit Case has a 1 year warranty.

Features & Benefits:

600-denier proprietary DuraCloth(tm) & rigid wall of lightweight corrugated polymer

Double-stitched taped seams

Bolt and locking nut through-wall hardware assembly

Corners and rails are made of high-impact shock-absorbing lightweight polymer

Can be wheeled or carried

Non-scuff clear urethane inline skate wheels

Large #10 coil zippers with high visibility red pull-tabs

Six adjustable polymer reinforced Velcro

$193.95

Transpac Dual Kit Lighting Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Photoflex Transpac Dual Kit Case has enough room to accommodate two lighting setups. The case features rigid exterior walls to help protect the case contents, and the interior can be configured to your liking. Inline-style wheels provide smooth rolling for this well-built case, which features durable handles, a heavy-duty zipper and double-sewn construction.

Case interior dimensions are 46L x 10.5W x 10.5H”.

Features:

Rigid exterior walls
Inline-style wheels
Hard plastic leg supports
Durable handles
Heavy-duty zipper
Double sewn-construction
Movable interior panels for custom configurations
20 lbs.

$247.95

Studio Kit Case

Samy's Camera — Mon, 04 Jun 2012 07:00:00 GMT

The Profoto Studio Kit Case is a carry bag for easy transport and convenient storage of lighting gear. Example of kit that fits into this bag: 2 D1 Air incl power cords + 2 D1 stands + 2 Umbrella S + 1 Air Remote.

Features:

Adjustable shoulder strap
Softpadded sides.
Heavy duty Nylon fabric and zippers.
Window pocket for address card etc.

$135.00

Deluxe Travel Bag for 5 ft. Reflectors

Samy's Camera — Thu, 05 Jul 2012 07:00:00 GMT

The Profoto Deluxe Travel Bag for 5 ft. Reflectors is a storage bag for carrying the Profoto 5 feet reflectors. It accommodates the reflectors inside housing, made especially for storage. The bag is made of Nylon for long life and durability.

$186.00

3i Series Waterproof Case for Zoom H4N

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The SKB 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a continuous molded-in hinge, trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage.

$69.99

iSeries GoPro Camera Case (2 Pack)

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

The SKB GoPro Camera Case 2.0 is a custom waterproof case designed to fit up to 2 GoPro Cameras along with accessories. The custom interior also features two slots to safely secure your memory cards. The GoPro Camera Case 2.0 is part of our iSeries of cases.

$69.99

3i Series Mil-Standard Waterproof Case 4 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Small Military-Standard Waterproof Case 6 (W/ Cubed Foam)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The black Mil-Std. Waterproof Case 6 with Cubed Foam from SKB is a very rugged and durable case for your photo, video and audio equipment. This version comes with cubed foam that can be configured to accommodate whatever gear you are carrying. It's ATA 300 (Airline Transportation Association) rated; water and dust tight and made to take a licking. It also comes with a very handy ambient pressure equalization valve. For additional security and peace of mind, there are stainless steel locking loops that will accept a user-supplied TSA approved lock.

The case is secured with strong trigger latches and carried by its comfortable rubber cushioned grip handle. The injection molding is designed to be UV, solvent, corrosion and fungus resistant. SKB knows that cases take a beating during transportation, so they have designed this one to be impact-resistant. Even the hinge is molded into the case as well. Backed by its lifetime warranty, this 3I series case will provide you with a safe, secure and reasonably lightweight way to transport your valuable equipment.

Includes several layers of foam for increased equipment protection
Stainless steel locking loops
Waterproof and dust tight design
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage
ATA 300 rated (Airline Transportation Association)
Accepts TSA (Transportation Security Administration) latches

Carry-On Form Factor
FAA and airline carry-on specifications are subject to change without notice, please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45.0" (114.3 cm). The external dimensions of this case add up to 35.9" (91.2 cm)

$114.99

3i Series Mil-Standard Waterproof Case 6 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

i-Series H4N/DSLR Combo Case

Samy's Camera — Tue, 29 Jan 2013 08:00:00 GMT

SKB has expanded their iSeries waterproof hard cases with custom interiors to accommodate the ever growing pro audio video markets. The SKB i-SERIES H4N/DSLR COMBO CASE is the ideal case for transporting a DSLR Camera along with a Zoom H4n audio recorder. This case includes custom PE foam pockets for a standard DSLR camera, H4N Recorder, and accessories.

These custom waterproof 3i-1510H4SLR case is backed by SKB's unsurpassed no-fault Million Mile Guaranty (Lifetime Warranty).

SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Features:

ltra high-strength polypropylene copolymer resin
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
Resistant to corrosion and impact damage
Molded-in hinge
Patent pending "trigger release" latch system
Rubber over-molded cushion grip handle
Custom cut foam interior
Locking loops for a customer supplied lock

$149.99

3i Series Mil-Standard Waterproof Case 7 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3i Series Rolling Mil-Standard Waterproof Case 7 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3i Series Rolling Mil-Standard Waterproof Case 8 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3I-1813-5B-N Waterproof Laptop Case (Black)

Samy's Camera — Thu, 04 Oct 2012 07:00:00 GMT

The SKB Cases 3I-1813-5B-N Waterproof Laptop Case (Black) is an injection molded ultra high-strength polypropylene copolymer resin case. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle and automatic ambient pressure equalization valve. It is resistant to UV, solvents, corrosion, fungus and impact damage, and the cases are lockable with a customer supplied padlock.

This case fits 13-15" laptop computers ad has an adjustable puzzle foam interior.

Injection molded ultra high-strength polypropylene copolymer resin case
Adjustable puzzle foam interior

Certifications

ATA (Air Transport Association) category 1 rated
MIL-STD-810F Military specification for resistance to UV, solvents, corrosion, fungus and impact damage
MIL-STD-C-4150J Military specification for waterproof and water-vapor proof cases for transit and storage
IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m
MIL-STD-648C Military specification for automatic ambient pressure equalization valve
Trigger release latch system is lockable with a customer supplied padlock
Continuous molded-in hinge for added protection
Temperature rating = -40 to +160°F (-40 to +71.11°C)
Snap-down rubber over-molded cushion grip handle

$229.99

3i Series Rolling Mil-Standard Waterproof Case 14 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

iSeries 1914 Pro DSLR Case

Samy's Camera — Mon, 25 Feb 2013 08:00:00 GMT

The SKB iSeries 1914 Pro DSLR Case (3i-19148DSLR) is the ideal case to protect DSLR Cameras and their popular accessories. The interior of this case is made of high quality PE foam and can fit up to two camera bodies. The main camera compartment can be adjusted to fit a variety of DSLR body sizes. This section also has a perforated piece of foam that can be removed to accommodate cameras with battery grips. The orientation of the DSLR fit allows access to the memory card without removing the camera. It also allows for quick and easy access to the camera by leaving the grip exposed to grab.

This case features four lens slots. Three of the slots are adjustable to fit a variety of lenses. Each one of the three adjustable slots contains three half inch foam rings that can be removed to fit different sized lenses. There is a section for lens hoods which can also be adjusted by three half inch foam rings. This case has additional compartments to fit a flash, memory cards, batteries, and other additional accessories. This case has wheels and a pull out handle for easy transportation.

The iSeries 1914 Pro DSLR Case, (3i-19148DSLR) has TSA lockable trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.

SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Features:

Custom cut PE foam to fit up to two DSLR bodies, lenses, lens hoods, flash, batteries, memory cards and additional accessories
Removable foam sections to fit a variety of camera bodies (e.g. cameras with battery grips) and lenses
Patented TSA Trigger Release Latches
Pull out handle and wheels
Unconditional Lifetime Warranty
Ultra high-strength polypropylene copolymer resin
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
Resistant to corrosion and impact damage
Molded-in hinge
Rubber over-molded cushion grip handle
Locking loops for a customer supplied lock
Patented "trigger release" latch system
Rubber over-molded cushion grip handle

$279.99

T538 TriPak for C Stands and Light Stands up to 52 in Long

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Tenba T538 TriPak for C Stands and Light Stands up to 52 in Long is an unpadded, 1050 denier ballistic nylon bag made to carry a C stand and light stands up to 52" long. The case has a zippered front pocket for accessories and is carried by an attached shoulder strap.

Unpadded, 1050 denier ballistic nylon case made to carry C stand and light stands up to 52" long
Front zippered pocket for accessories
The case is carried by an attached shoulder strap

$69.95

Car Case CC14 - for 1 Broncolor Pulso Power Pack

Samy's Camera — Mon, 16 Apr 2012 07:00:00 GMT

The Tenba Car Case CC14 is a padded case primarily designed to carry lighting equipment in a car. The case utilizes Tenba Safe construction which is lighter construction than Tenba Air Cases resulting in a more affordable bag. It is highly resistant to puncture while absorbing and dispersing shock.

Padded lighting case designed to be car transportable.

Tenba Safe Construction is lighter construction than Tenba Air Cases resulting in a more affordable bag. It is highly resistant to puncture while absorbing and dispersing shock.

Luggage Cart Straps are two bands of 2.0" wide webbing to quickly secure your case to any luggage cart without using shock cords. It cinches tight with a touch fastener closure.

Compatible with;

One Broncolor Pulso pack

$108.95

CC22 Car Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Car Cases are the perfect solution when you need serious transport protection but don't need to ship or check your equipment. They are super lightweight, economical and versatile. Over a dozen sizes, great for wedding and location work, or other medium-duty applications.

$196.00

CCPSF Car Equipment Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba Car Case CCPSF is an ideal solution for serious equipment transport when you are not needing to ship or check your gear. The CCPSF is super-lightweight, economical and versatile. Perfect for wedding and location work, or other medium-duty applications.

Capacity: Soft Light reflectors up to 22” in diameter. Fits Profoto, Broncolor and other manufacturers.

$251.00

Roadie II Rolling Photo/Laptop Case (Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Roadie II Large Photo/Laptop Case holds a professional DSLR, HD video or medium format camera system, as well as a laptop (up to 17 inches), plus tons of accessories. The Large Roadie meets U.S. domestic airline carry-on standards, as well as the standards for many international flights.
FEATURES:

Heavy-duty, four-section handle extends to full, comfortable walking height, easing the strain on your back and shoulders when wheeling through long airport stretches.

Built with the finest materials available: Weatherproof ballistic nylon exterior, YKK

$335.95

Air Case for Profoto Pro 7 Power Pack with 2 Heads

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

All cases for Profoto lighting gear feature Tenba's patented Air Case construction

$439.00

RS-E22 Roadshow Air Case (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Roadshow RS-E22 Air Case (Black) from Tenba is made to transport an EIZO ColorEdge CG241W, CE240W or CG220 22" LCD monitor. The case features Air Case construction which is a multi-layered skeleton of air-channeled plastic panels, high-density foam, and specially-molded framing components, with a heavily reinforced ballistic nylon outer-shell that provides the protection of a hard sided case at a fraction of the weight. The case is strong enough to stand on, even when empty, and is built to meet or exceed ATA shipping standards. There is an internal framework of foam inserts that has been custom fitted to hold the monitor more safely and securely than the original equipment shipping carton.

Air Case shipping case for LCD monitor
Built to meet or exceed ATA shipping standards
Custom molded styrene top rim makes case rigid enough to stand on, tough enough to check as luggage
Custom fit, hand-cut internal foam

Capacity

22" LCD display
Keyboard
Mouse
Cables
Welded steel D-rings
Compatible with EIZO ColorEdge CG241W, CE240W or CG220 22" LCD monitor

$495.00

AW-MLC Medium Wheeled Lighting Air Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba AW-MLC Medium Wheeled Lighting Air Case features Tenba’s patented Air Cas construction, comprising a multi-layered skeleton of air-channeled plastic panels, high-density foam, and specially-molded framing components, with a heavily reinforced ballistic nylon outer shell, providing the protection of a hard-sided case at a fraction of the weight. Air Cases are strong enough to stand on, even when empty, and are built to meet or exceed ATA shipping standards. Case includes adjustable dividers that can be trimmed by the user to customize the interior.

Capacity: Large lighting systems - 1 pack and 2 heads, or 3 heads, or similar setups

$618.00

Transport Computer Equipment Air Case with Wheels for 27" Apple iMac (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Air Cases feature Tenba's exclusive design and construction

$655.00

AW-LLC Large Lighting Case with Wheels (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Air Cases feature exclusive design and construction

$668.00

RS-G5W Roadshow ATA Air Case with Wheels for Apple G5 Tower Computer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba RS-G5W Roadshow Air Case with wheels is designed to be an ATA, shippable, checkable transport case for the Apple G5 tower computer, keyboard mouse and cables. The case uses the Tenba Air Case construction, which provides maximum protection at a fraction of the weight of molded plastic, fiber, or other hard-sided cases. Roadshow cases are strong enough to stand on, even when empty. The RS-G5W also features a heavy-duty wheel system, for even better flexibility and easier transportation.

Features

Air Case construction comprises air channel polyethylene walls, high-density cross-linked foam padding, and molded styrene rim.
Meets or exceeds ATA shipping standards.
1050 denier Protek Ballistic Nylon exterior resists abrasion, puncture, moisture and dirt and soft, brushed Tricot interior lining cradles your cargo in cushy, scratch-free comfort. Equipment slides in and out smoothly and safely.
Massively reinforced seams and stress points, welded steel D-rings add to the overall equipment protection.
Lockable YKK #10 zippers, seatbelt-grade nylon webbing are used to close the case.
Padded hand grips to carry the case.
Heavy-duty wheel system with a retractable handle, for more flexibility and easier transportation

$675.00

8 AA Battery Holder (Black/Green)

Samy's Camera — Wed, 25 Jan 2012 08:00:00 GMT

The 8 AA Battery Holder (Black/Green) from Think Tank provides you with a convenient way to always know you'll have fresh batteries on hand. This lightweight pack is made from rugged ballistic nylon that guards the eight AA batteries that are held in two rows of four. The pack folds in half making it easy to stuff in your camera bag or luggage. When it's empty, it folds flat for even easier storage. It's back by Think Tank's lifetime warranty against manufacturer's defects.

Carries 8 AA batteries
Batteries are held in two rows of four
Fold in half to close
Flattens when empty

$9.50

Strobe Stuff Flash Bag (Black)

Samy's Camera — Wed, 25 Jan 2012 08:00:00 GMT

The Strobe Stuff Flash Bag (Black) from Think Tank is a padded belt pouch that is targeted to hold your Nikon SB-900, Canon 580EX II or similar sized flash. It can also accommodate a variety of accessories ranging from an external battery pack in the front pocket to spare batteries or gels held in their own clear pocket. A cable pass-through allows your flash to be attached to its battery without keeping the pouch open.

The nylon pouch is accessed by strong YKK zippers and comes with a rain cover for the outdoor shooter. The pouch makes good use of Think Tank's Rotate or Lock technology that permits you to arrange the pouch on your optional Think Tank Belt so that it doesn't get in the way when you shoot. That means whether you're standing, kneeling or prone, you can easily shift the pouch so that it's either out of the way or hands ready for accessing equipment. Backed by its lifetime warranty against manufacturer's defects, the Strobe Stuff is just the accessory you need when shooting weddings, press and sports events or outdoor fill flash.

Accommodates one pro-sized flash with (most) diffuser(s) attached. Specially designed front pocket with cable pass-through will hold external battery pack attached to strobe. Also has 4 slots for gels and/or extra batteries
Front pocket holds an external battery with pass-through port for power cable. Clear pockets for gels or extra batteries
Every modular component can be locked on a belt to keep bag in place on any of Think Tank's camera belts
Smooth back finish on each modular component
Rotate or lock components on the belt
Attaches to any optional Think Tank Photo belt or belt pack
Abrasion-resistant YKK RC Fuse zippers
Removable seam-sealed rain cover included
Mid-weight padding to protect your gear
Top grab handle
Attachment loops for the optional Keep-It-Up Shoulder Strap

Compatibility

Nikon SB-900, Canon 580EXII or similar DSLR flash with attached diffuser
Attached external battery pack
Gels and extra batteries