Tripod & Light Stand Bags

Ballistic nylon
Thermoform padded Interior
Full length zipper
Tapered shape allows you to store the tripod with the head attached. Tripod legs fit comfortably in the narrower end and extra space is allowed for the larger volume of the head at the wider end. This also means it is easier to put the tripod and head in the bag, even if the head levers and knobs are fitted and jut out slightly
Zipper extends down the length of the bag, but also fully opens the top end of the bag, making it easier to get your tripod in and out, as well as being able to extract the tripod quickly
Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It serves a double purpose by protecting the tripod's hard edges when carrying
Inner pocket holds accessories (such as video head pan bars) where they won't rattle around or get damaged
Bag is slightly tapered to provide a better fit for a tripod with the head attached. The wider end of the bag accommodates the head without requiring all levers to be removed

Carrying Options

Carry handles
End handles
Shoulder strap
Compatible with Manfrotto tripod with head up to 47" long

$133.19

Tuffpak Series Hard Tripod Case

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-0741 Tuffpak Series Hard Tripod Case is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 41-45" w/ 75mm Ball Head
Molded Polyethylene Case
2.0" of Foam in Lid and Base
Molded Carry Handle

$285.95

TP-0738 Tuffpak Hard Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tuffpak Hard Tripod Case (Black) is a 9" octagonal case that will snugly hold a tripod with a length of 45-50" and up to a 100mm ball head. Each case is made from rotationally molded cross-linked polyethylene. The process takes nearly 45 minutes per case and produces a durable tripod case. The tripod case comes with 2.0" of foam in the lid and the base to protect the equipment. The foam in the lid is glued in and the foam in the base (which is protected from the feet of the tripod by a plastic disk) is held in place by detents that are molded into the base of each case. The case is carried by a molded-in handle.

$294.95

9 In. Tuffpak Series Hard Tripod Case

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-0936 9 In. Tuffpak Series Hard Tripod Case is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 36-41" w/ 100mm Ball Head
Molded Polyethylene Case
2" of Foam in Lid and Base
Molded Carry Handle

$314.95

9 In. Tuffpak Series Hard Tripod Case

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-0942 9 In. Tuffpak Series Hard Tripod Case is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 42-47" w/ 100mm Ball Head
Molded Polyethylene Case
2" of Foam in Lid and Base
Molded Carry Handle

$319.95

TP-0950 Tuffpak Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tuffpak is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak but it's worth it! The Tuffpak comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case. Key locks can be added as an accessory. The rotational molding process used to form every Tuffpak enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Every corner in a Tuffpak has 20% more material than the sidewalls. All of this yields a case so "tuff" that Nalpak stands behind every one of them with their "Guaranteed For Life" guarantee. Tuffpak is resistant to: jet fuel, solvents, moisture, dents, abrasions, shock, cold to -40 degree F and heat to +140 degree F. Some Tuffpak models come equipped with wheels which are permanently attached and protected by "fenders" that are molded into the bottom of the case. No need to remove them (and possibly lose them) or find a place for them in your other bags. The wheels along with the pull handle on the lid make it a snap to move even a heavy load.

$329.95

9 In. Tuffpak Series Hard Tripod Case with Wheels

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-0936WH 9 In. Tuffpak Series Hard Tripod Case with Wheels is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 36-41" w/ 100mm Ball Head
Molded Polyethylene Case
2" of Foam in Lid and Base
Molded Carry Handle
Built-in 2.0" Recessed Wheels

$339.95

10 In. Tuffpak Series Hard Tripod Case with Wheels

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-1048WH 10 In. Tuffpak Series Hard Tripod Case with Wheels is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 48-53" w/ 100mm Ball Head
Molded Polyethylene Case
2.0" of Foam in Lid and Base
Molded Carry Handle
Built-in 2.0" Recessed Wheels

$394.95

14 In. Tuffpak Series Hard Tripod Case with Wheels

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's TP-1440WH 14 In. Tuffpak Series Hard Tripod Case with Wheels is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 44-48" w/ 150mm Ball Head
Molded Polyethylene Case
2.0" of Foam in Lid and Base
Molded Carry Handle
Built-in 2.0" Recessed Wheels

$444.95

Deluxe Tripod Bag (Small)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Promaster Deluxe Tripod Bag is made of heavy duty cordura nylon and built to stand up to the rigors of traveling with your tripod. Its secure flap closure allows for quick retrieval and storage of your tripod while the handy exterior pouch is perfect for smaller accessories.

$19.95

Deluxe Tripod Bag (Medium)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Deluxe Tripod Bag (Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Deluxe Tripod Bag (Extra Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

324 Tripod Bag Medium, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tamrac 324 Tripod Bag is designed for tripods up to 25 inches when folded. It features zippered exterior pocket for accessories. It is constructed from waterproofed material.

$43.95

326 Tripod Bag Large, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1.5-5x20 Meostar R1 has a 30mm maintube diameter, with its reticle placed in the rear focal plane (in front of the eyepiece) to maintain its virtual size throughout the entire magnification range. Targeting smaller game at longer distances is quite easy with the reticle location in the rear focall plane.

The 1.5-5x20 Meostar R1 is best suited to rimfire and small/short-distance target/varmint shooting applications, with an extremely broad range of viewing angles spanning from 4.5-15.5°.

Features

The Meostar Finish Advantage The supreme 1.5-5x20 Meostar R1 riflescope has an aircraft aluminum alloy construction and a bead blasted exterior, as well as an "Elox" andonizing process, which ensure an extremely durable and non-reflective black matte outer finish.
Meostar's Magnificent Multicoatings Meopta has dramatically improved their light transmission per glass surface with a proprietary IMB-5501 anti reflective coatings & ION assisted applications process. Light transmission is staggeringly high at 99.8% per surface!
Two-piece 30mm internal diameter tube
±3 Dioptric correction
Soft rubber eyecup prevents injury from recoil power
Extremely compact and lightweight instrument

$54.95

327 Tripod Bag XL, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tamrac 327 Tripod Bag can accommodate tripods up to 39" when folded. The zippered exterior pocket can hold cable releases and other accessories. Made of waterproofed PowerGrid Cordura.

$56.95

328 Professional Location Bag, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This professional light stand and tripod carrying system is foam padded and has internal Cordura pockets to keep the equipment organized.

$147.95

T488 TriPak for Tripod, Light Stand or Umbrella up to 47 in. long (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The T488 TriPak - for Tripod, Light Stand or Umbrella up to 47 in. long (Black) from Tenba is an unpadded, 1050 denier ballistic nylon bag made to carry a tripod, light stands or umbrellas up to 47" long. The case has a zippered front pocket for accessories, and is carried by an attached shoulder strap.

Unpadded, 1050 denier ballistic nylon case made to carry tripod, light stands or umbrellas up to 47" long.
Front zippered pocket for accessories
The case is carried by an attached shoulder strap.

$62.00

TTP34 TriPak Light Stand and Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba TriPak TTP34 case makes it easy to transport and carry your light stands and tripods while offering your gear substantial protection. The TriPak TTP34 offers generous space inside while surrounding your equipment with light padding. Accommodates tripods and stands up to 33” in length.

$131.00

TTP46 TriPak Light Stand and Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba TriPak TTP46 case makes it easy to transport and carry your light stands and tripods while offering your gear substantial protection. The TriPak TTP46 offers generous space inside while surrounding your equipment with light padding. Accommodates tripods and stands up to 45” in length.

$155.00

TTP75 TriPak for Long Tripods, Light Stands, Umbrellas or Background Support System (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The TTP75 TriPak - for Long Tripods, Light Stands, Umbrellas or Background Support System by Tenba is a triangular shaped, padded bag made to carry long tripods, light stands, umbrellas or background support systems. The case is constructed from 1050 ballistic nylon with air-channeled polyethylene sides, crossed-cell, cross-linked foam and nylon pack cloth lining. A large flat cloth panel separates two layers of contents; keep your umbrella and light banks separate from your stands and tripod, thereby reducing scratching and abrasion. The case has a padded handle, haul straps located at the ends, and D-rings for an optional shoulder strap.

Padded nylon bag made to carry a long tripod, light stand or background system.
The case has semi-rigid sides made of air-channeled polyethylene.
The case is lined with nylon pack cloth.
A large flat cloth panel separates two layers of contents; keep your umbrella and light banks separate from your stands and tripod.

Carrying options

Padded handle
Haul straps located at the ends for easy loading.
D-rings for optional shoulder strap

$274.95

48" Rolling Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rolling Tripod Case is available in 48-inch length. Each case in hand-built in Tenba's Brooklyn, NY factory to provide the best protection available. Custom-made, air-channeld ABS walls and ballstic nylon exterior ensure amazing durability, and heavy-duty, ball bearing wheel assemblies make it easy to move heavy tripods and stands.

$330.00