Mics - Windscreens

WS 58 Foam Wind Screen for M 58 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.

$17.50

BBI-L02 Windbubble Wind Screen for 5-8mm Microphones (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. Yes, nothing. And this nothing is exactly what makes the bubble tick. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible "I'm in the middle of the hurricane"- interviews, it passes right through. The windbubble is specially constructed to be mounted quickly and easily on the specified types of microphone, and to not fall off during use.

$34.00

BBI-L03 Windbubble Wind Screen for 5-9mm Microphones (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

BBI-L04 Windbubble Wind Screen for 8-13mm Microphones (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

BBI-L01 Windbubble Wind Screen for 3-4mm Microphones (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Topper Windscreen for DR-100 Recorder

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The K-Tek Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Tascam DR-100 audio recorder.

$40.50

BABY KOALA LAV WINDSCREEN (black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar the small metal helmet style cover.

$19.95

BABY KOALA LAV WINDSCREEN (grey)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

BABY KOALA LAV WINDSCREEN (white)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

WS-HS1-B Pop Filter/Wind Shield (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.

$11.99

WSVM Shotgun Wind Screen

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives.

COMPATIBLE MICROPHONES:

NTG-1
NTG-2
NTG-3
VideoMic

$11.99

WS-HS1-P Pop Filter/Wind Shield (Pink)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.

$11.99

WS-LAV Pop Filter/Wind Shield

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.

$11.99

WS2 Windscreen

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Rode WS2 Windscreen is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Microphones. Properly equip your microphone with the WS2 to avoid wind noise and pop.

$19.99

WS4 Windscreen for NT4 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop. If you have a Rode NT4 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.

$19.99

WS3 Windscreen for NT3 (Grey)

Samy's Camera — Sun, 04 Dec 2011 08:00:00 GMT

The Rode WS3 Windscreen provides additional protection for the microphone capsule against any wind noise or plosives.

Compatibility: If you have a Rode NT3 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.

$19.99

WS5 Windscreen for NT5 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.

$19.99

MINIFUR-LAV Synthetic Fur Windshield

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.

$24.99

Dead Kitten Wind Muff

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Dead Kitten Windshield is designed for minimising any wind noise when using a microphone in high wind conditions.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

$24.99

Dead Cat Wind Muff

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :

NTG-1
NTG-2
NTG-3
VideoMic

$39.00

Dead Cat Wind Muff

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.

$39.00

DeadWombat Artificial Fur Windshield for Rode Blimp

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.

$49.95

WS6 Deluxe Wind Screen

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:

NTG-1
NTG-2

$59.00

WS7 Deluxe Wind Screen

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and diameter of 0.78" (20mm).

COMPATIBLE MICROPHONES:

NTG-1
NTG-2
NTG-3

$59.00

Blimp - Complete Windshield and Suspension System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:

Greatly reduces handling and wind noise
Accomodates most shotgun microphones up to 325mm (12 ¾”) in length
Adjustable dual hoop suspension system
Dead Wombat windshield and tail cable included

COMPATIBLE MICROPHONES:

NTG-1
NTG-2
NTG-3

$299.00

MZW4EW Evolution Wireless Foam windscreen for ME4 Lavalier Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

MZW-4EW Evolution Wireless Foam windscreen for ME4 Lavalier Microphone.

$9.95

Foam Windscreen for the MKE400 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

$9.95

MZW-2 Steel Mesh Grill for MKE Microphones

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The MZW-2 Steel Mesh Grill is for the MKE platinum and MKE-2 Microphones.

$12.95

Evolution Wireless - Mesh grille for ME2 lavalier microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$12.95

MZW400 Wind-muff and XLR Adapter Kit for the MKE400

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.

$38.95

Black velour windscreen for ME66 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Sennheiser MZW66PRO is a black velour windscreen for the ME66 Microphone.

$84.95

MZW65 Pro Foam Windscreen for ME65 Microphone (Black)

Samy's Camera — Thu, 02 Aug 2012 07:00:00 GMT

The Sennheiser MZW65 Pro Foam Windscreen for ME65 Microphone (Black) is a black velour coated foam windscreens which offer even greater protection for reducing wind and popping noise for ME-65.

$84.95

MZH60-1 Long Hair Wind Muff for ME66 Microphone

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The MZH60-1 Long hair wind muff provides maximum protection against wind noise.

It is used together with the MZW 60-1

$229.95

Blimp Windscreen for MKH 60 and MKH 416

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This lightweight, rugged protective basket windshield provides excellent suppression of wind noise when used for outdoor applications. For use with Sennheiser ME66, MKH-416 and MKH-60 microphones.

$329.95

SG-200 Windscreen

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.

$26.95

MM-26 Mic Muff

Samy's Camera — Sun, 29 Jul 2012 07:00:00 GMT

The WindTech MM-26 Mic Muff is a high wind noise suppressor for the Audio-Technica AT8022 & BP4025 microphones. The MM-26 Mic Muff easily slips over an existing windscreen to provide up to 20dB noise reduction in 20MPH wind. The 3/4" length fur easily suppresses wind noise without altering the microphone's frequency and sensitivity response.

3/4" fur length for maximum wind diffusion
Specific models for original factory windscreens
American made quality at a realistic, affordable price
Models to fit both Professional and Consumer products
Slips easily over existing windscreen, includes Velcro closure
Acoustically transparent, doesn't degrade microphone performance

$29.95

Replacement Foam Windscreen for H4n

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Replacement Foam Windscreen from Zoom fits the H4n digital audio recorder, and helps to protect the onboard microphones from the effects of wind noise.

$9.95

APQ-2HD Accessory Set for Q2HD Video Recorder

Samy's Camera — Mon, 01 Oct 2012 07:00:00 GMT

The Zoom APQ-2HD Accessory Set for Q2HD Video Recorder includes six accessories to improve recording and enhance connectivity. The set comes with an HDMI cable for connecting the Q2HD to an HDTV, a windscreen for the microphone to reduce unwanted noise, a tabletop tripod with adjustable-length legs, a padded-shell case for protecting your Q2HD and an AC adapter with a USB cable for powering the Q2HD from a wall outlet. The USB cable also supports connection to your computer for transferring data.

HDMI cable for connecting with an HDTV
Windscreen to reduce noise
Tabletop tripod with adjustable-length legs
Padded-shell case for protecting your Q2HD
AC Adapter and USB cable for wall charging and computer connection
Compatible with Zoom Q2HD

$39.99